PAGEL PCC-I Mortar is easy to use, plastic strengthened and suitable for processing on vertical and overhead surfaces.Ready to use, single component. Resistant to frost and dew salt. We recommend using MSO2 as corrosion protection and adhesion layer.
HOME > Products > CONCRETE REPAIR > PCC-I MORTAR
PAGEL PCC-I MORTAR
Concrete-replacement-system
according to ZTV-ING, ZTV-W
Easy to use, plastic-strengthened
Highly suitable for use on horizontal
substrates
Ready to use, single component
Resistant to frost and dew salt
Applicable and load-able under dynamic stress

MH02: Corrosion protection and adhesion layer
Leveling course for bridges,tunnels
and car parks (underlining and coatings)
Concrete coatings,
Concrete floor surfaces
Leveling of gradients
Repairs of outbreaks
ZTV ING application: PCC I
ZTV W LB291 listed
Stress and strain classification
according to DAfStb-RiLi-SIB: M2

Aggregate
size
(inch)

Layer
thickness
(inch)
Compressive
Strength
(PSI)
Bending
Strength
(PSI)
Adhesive
strength
(PSI)

Yield
per bag
(ft³)

1d 7d 28d 1d 7d 28d 7d
MHO2 - - - - - - - - > 217.5 0.47
MH20 0 - 1/16 1/4 - 1-5/8 - 5,075 7,975 - 870 1,160 >290 0.44
MH80 0 - 5/16 > 1-3/16 - 5,075 7,975 - 870 1,160 >290 0.44

Data Sheet MSDS
PCCI Mortar MH20 and MH80 MSDS Sheet