Hydrophobierung
		Application   Hydrophobierung OS-A- / OS-B-area Concrete- and cement mortar surfaces facades bridges	Characteristics      crème-shaped solvent-free alkali-constant ready to use high penetration depth protects against moisture from the back unique apply

Product		apply	layer-	Technical Data			Amount	Container
			thickness				required
			mm				g/m²
O2A		1-coat	-	density: 0,90 g/cm³ pot life: unlimited			200	15 kg bucket

		CURING MEMBRANE
		Application   OS-C- / -OS-B-area bridges tunnels dams canals and concrete facades difficult to water cure	Characteristics   applicateable to moist-damp or dry surfaces short waiting periods vapour permeable free of solvents different RAL-colours

Product		apply	layer-	Technical Data				Amount	Container
			thickness				adhesive- strength	required
			µm				N/mm²	g/m²
O2C		2-coats	120	waiting period from 6 h (20 °C) on filler surface			1,5	180 *)	12,5 l = 18 kg bucket
(OS-B: O2A + O2C)
*) each apply

  

		concrete colour
		Application   OS-DII-areas bridges tunnels concrete- and mortar surfaces areas of fine cracks	Characteristics   crack bridging (even by -20 °C) high elasticity vapour permeable free of solvents different RAL-colours

Product		Apply	Layer-	Technical Data					Amount	Container
			thickness					adhesive- strength	required
			µm					N/mm²	g/m²
O2DE		2-3-coats	330 - 2660	Flexibility:		115 % (23 °C) 103 % (-20 °C)		1,3	340 *	12,5 l = 17 kg bucket
*) each apply

 

		CEMENT SLURRY
		Application OS-DI-areas bridges tunnels balconies terraces bathrooms below tiles and all water retaining structures areas of fine cracks	Characteristics    high elasticity crack bridging (even by -20 °C) vapour permeable two components cement based

 

		CEMENT SLURRY
		Application parts which are connected to the ground bridges tunnels concrete- and mortar surfaces wet- and moist areas	Characteristics    high elasticity pressure-waterproof one component cement based