|
|
|
- Cementitious non-shrink grout that is
equal in strength to epoxy
- V1/30 HF (0-1/8” inch / 0–3 mm) grout
V1/60 HF (0-1/4” inch / 0–6 mm) grout
- cement-based and chloride-free
- Certified to fire protection class A1 as specified by EN 13501 and DIN 4102
- single component - mixed only with water
- high early and final strengths
- controlled and even expansion with a rigid
bond between concrete foundation and
machine base plate
- pumpable and easy to pour – even at low temperatures
|
|
Application
- turbines, generators, compressors,
diesel
engines
and other power equipment
operating
under heavy vibration
- wind-power structural joints
- crane rails and radio telescopes
- high density grout for high load supports
and bearing constructions
- rail support systems, Ribbed slabs
and automatic warehouse supports
- grouting of joints and bearings when
having high-density prefabricated units
- offshore pile / sleeve connectionachinery
-
anchoring
-
turbines
-
bridge
bearings
-
potable
water equipment
-
concrete
structures
-
high storage areas
-
pre-cast concrete parts
-
rails
-
industrial plants
|
|
|
Product |
|
|
Aggregate
size |
Grouting height |
Technical
Data |
Yield |
Container |
|
|
|
|
|
|
Compressive
strength (Fluid )
PSI
|
Expansion
|
per
bag
|
bag
|
|
V1 |
MSDS |
inch |
inch |
24h |
3d |
7d |
28d |
Vol.
% |
cubic
feet |
lbs |
V1/30HF |
 |
|
- 0 - 0.125
|
- 0.2 - 2.75
|
- 10,150
|
- 10,875
|
- 13,060
|
- 15,225
|
- + 0.5
|
0.32 |
- 44
|
V1/60HF |
0 - 0.25 |
1.5 - 4.75 |
- 12,644
|
- 19,459
|
- 21,634
|
- 26,100
|
+ 0.6 |
0.32 |
44 |
Additives used in these products have an “EG-Conformity Explanation” according to § 9 “Building Product Law Authorization”. Thus the additives correspond to the regulations of the EN 934-2:2001-07.
PRODUCTS
grouts and steel fibre grouts  anchor and injection grout products after ZTV-SIB concrete repairing universal-mortar
quick-setting mortar
universal-mortar (drinking water areas)
channel-mortar
surface protection areas crack injection industriel floors additional products for construction resines
grout
flowable concrete [HT]
flowable concrete [B45]
pre-mixed-grout
quick-pre-mixed-grout
under-water grout
basalt-grout
steel fibre reinforced grout
vs-flowable concrete (Pfeifer Box)
grout
high density grout
quick-setting grout
extremly fast setting grout
anchor grout
injection grout
system overview
PCC I mortar
PCC II mortar
Rili-Sib mortar
SPCC-screeding compound
OS-A
OS-B OS-C OS-DI
OS-DII
hydrophobation
concrete protection rigidly
PCC-screedeing compound
concrete protection rigidly
PCC-screeding compound
final coating
corrosion protection
PCC mortar Rili-Sib mortar
ZTV-W PCC-screedeing compound
SPCC-spray mortar
universal-mortar
quick-repair mortar
universal-mortar (drinking water areas)
channel-mortar
Tiefbaumörtel
PCC I mortar
PCC II mortar
hydrophobation
surface protection areas seal slurry
cement-bound resins
hard-substance screed hard-substance floor
bonding bridge
metallically
mineral
stahlfaserbewährt
coating
epoxy mortar
thin coating
curing membrane
quick-repair mortar
construction and tile adhesive
bonding additive
resin
coating
epoxy mortar
thin coating
crack injection
grouts and steel fibre reinforced grout concrete repairing surface protection areas / color crack injection industriel floors additional products for construction resines
grouting ares
hand packed areas
under-water area
high-temperature areas
heavy duty areas
special-grout quick-setting grout
Schachtverguss
anchorages
high-heavy grout
high density grout
joint-grouting
anchor grout
injection mortar
corrosion protection
PCC-concrete repair screeding compound
spray mortar
universal-mortar
drinking water area
channel-mortar
quick-setting mortar
wall- and ceiling surfaces
floor surfaces
hydrophobation
concrete protection colour cement slurry
industriel floors steel fibre floors
bonding bridge
metallically
mineral
steel fibre flooring
curing agent
bonding additive
quick-setting mortar
construction- and tile adhesive
resin
coating
epoxy mortar
thin coating
crack injection
central
germany
world-wide
|
