ANCHOR GROUT
		Application:   Areas of anchoring E1: mining and tunnel construction E1SF: stabilization of subsoil E2 / E3: filling of joints and cavities	Characteristics: pumpable and injectable free flowing non-shrinking high adhesive strength mining approvals E2:  after 6 h: 18 MPa E3: at 86 °F: 60 min. processing time

Product	Data Sheets		Aggregate size	Grouting height	Technical Data					Yield	Container
					Compressive strength MPa / PSI				Expansion per bag
	Spec.	MSDS	inch	inch	1d	3d	7d	28d	Vol. %	cubic feet
E1			0 - 0.001	up to 0.8	49 7107	58 8412	70 10150	84 12180	+ 1.0	0.43	44 lbs bag
E1SF )*			0 - 0.001	up to 0.8	40 5802	52 7542	82 11890	89 12910	+ 1.0	0.54	55 lbs bag
E2 )**			0 - 0.001	up to 0.8	24 3481	41 5947	50 7252	91 13200	+ 1.0	0.43	44 lbs bag
E3 )***			0 - 0.001	up to 0.8	35 5076	72 10440	74 10730	80 11600	+ 0.8	0.39	44 lbs bag
)* thixo )** fast (2 h) )*** fast (3 h)

(for metric conversion click here) 

		Injection grout
		Application   areas of injection and anchoring mining and tunnel constructions flooded drilled holes	Characteristics   free flowing inject able mining authorized

Product	Data Sheets		Aggregate size	Grouting height	Technical Data					Yield	Container
					Compressive strength MPa / PSI				Expansion	per bag
	Spec.	MSDS	inch	inch	1d	3d	7d	28d	Vol. %	cubic feet
E1F			-	-	47 6817	51.5 7469	60.5 8775	75.4 10940	+ 0,5	0.47	44 lbs bag
E2F			-	-	28 4061	57 8267	62 8992	72 10440	+0,5	0.47	44 lbs bag

(for metric conversion click here)