CONCRETE GROUTS V80 C45 and V160 C45 are used when grouting large volumes at once. It shows great flow with low development of hydration temperature. Used for supports of buildings, columns, machines etc.

HOME > Products > NON SHRINK GROUTS > CONCRETE GROUTS V80 C45, V160 C45

PAGEL - CONCRETE GROUT

• High flow ability
• Low development of warmth
• Low elasticity module
• Pumpable
• Impervious to water and extensively resistant to oil
• Ready for use
• Controlled increase of volume

• Columns and machines
• Repairing-grout for prefabricated
steel- concrete units and
steel-concrete tubes
• Supporting of buildings
• Grouting of pockets
• Noise prevention walls
• Grouting of large volumes with
control of the hydration temperatures
at the same time
• Industrial plants

	Aggregate size (inch)	Grouting height (inch)	Compressive Strength (PSI)			Bending Strength (PSI)			Expansion (Vol. %)	Yield per bag (ft³)
			1d	7d	28d	1d	7d	28d
V80 C45	0 - 5/16	2-1/3 - 7-7/8	2,175	5,800	8,700	217.5	507.5	725	+ 0.4	0.42
V160 C45	0 - 5/8	3-1/8 - 15-3/4	2,175	5,800	8,700	217.5	507.5	725	+ 0.4	0.44

Data Sheet	MSDS